I got my boat without a front hatch. I purchased a small hatch and installed it, but I would rather have a stock Mac hatch so I'll have more access to the cabin from the deck. I'd like to be able to stow and retrieve my spinnaker from the hatch and the one I installed is just too small. Any ideas of where I can find one from an old Mac 22 or 25? There must be some boat junk yards out there somewhere. Here is what it looks like -
Are you needing just the cover? My 71 has the hatch on the cabin top right in front of the mast. I could take the measurements off it if you have to resort to making one. Might be able to make a female mold of it.....time is the only issue there.
Mike
Lindale TX
Just went and took a look at my hatch. Since it is mounted on the cabin it has a slight curve fore to aft and side to side where yours looks like it is mounted on the flat foredeck. Might still be a good starting point.
