Stop the galley rocking????
-
James V
- Admiral
- Posts: 1705
- Joined: Sat Jan 22, 2005 9:33 am
- Sailboat: MacGregor 26M
- Location: Key West, Fl USA, 26M 06, Merc 50hp BF "LYNX"
Stop the galley rocking????
When I am using the Galley it is rocking port to starboard when I am preparing the meal. What what are the ways to stop that?
-
James V
- Admiral
- Posts: 1705
- Joined: Sat Jan 22, 2005 9:33 am
- Sailboat: MacGregor 26M
- Location: Key West, Fl USA, 26M 06, Merc 50hp BF "LYNX"
It is not the other boats rocking the galley, it is me working in it. Cutting, cooking preps, cooking and cleaning. As well as leaning on it for a hand hold. Is there a prefered shim or someother method to keep it from moving?
What do you use to slove the problem?
Is there something missing from the factory? (it is a new boat)
What do you use to slove the problem?
Is there something missing from the factory? (it is a new boat)
Is the whole boat rocking or just the galley itself?
I have an 05M and my galley seems relatively well secured... Although, we don't use it much...
I'd make sure the thing is riding the tracks properly. It could very well have come off the track either in shipment or just not been assembled properly...
I have an 05M and my galley seems relatively well secured... Although, we don't use it much...
I'd make sure the thing is riding the tracks properly. It could very well have come off the track either in shipment or just not been assembled properly...
Stop the galley rocking
Mine did the same thing. The reason is there are only three mount points. I stopped mine from rocking by cutting a small foam wedge and sliding it under the corner when in use. The foam I used is a type they use for packing its usualy green and is firm and dosen't crumble. If yoo can't find any drop me an email and I'll send you a piece.
Garry 05M Etec 50
Garry 05M Etec 50
