how big are your FENDERS / rubbing pounch?

A forum for discussing topics relating to MacGregor Powersailor Sailboats
Post Reply
User avatar
kurz
Admiral
Posts: 1304
Joined: Mon Dec 06, 2010 9:07 am
Sailboat: MacGregor 26M
Location: Zürich, Switzerland, Europe

how big are your FENDERS / rubbing pounch?

Post by kurz »

Hello
I will get my M26 sonn :-)

I ordered 4 fenders, length 53cm/14cm. Now I guess, that they are to small.

How long are yours?

Thanks.

kurz.
User avatar
c130king
Admiral
Posts: 2730
Joined: Sun Nov 05, 2006 5:30 pm
Sailboat: MacGregor 26M
Location: Wiggins, MS --- '05 26M "König" w/ 40hp Merc
Contact:

Re: how big are your FENDERS / rubbing pounch?

Post by c130king »

Size doesn't matter...it's how you use them... :wink:
User avatar
FinallySailing
First Officer
Posts: 281
Joined: Fri Jul 02, 2010 2:37 am
Sailboat: MacGregor 26S
Location: The Sunny South East of England between Suffolk and Essex

Re: how big are your FENDERS / rubbing pounch?

Post by FinallySailing »

kurz wrote:Hello
I will get my M26 sonn :-)

I ordered 4 fenders, length 53cm/14cm. Now I guess, that they are to small.

How long are yours?

Thanks.

kurz.
Hi there, I think they are just about the same size as the ones that I bought for my 26S. A bit bigger or smaller doesn't matter. Or is there such a thing as fender envy ? Being able to drop them at the right hight is more important. BTW ... interesting play of words, your post with your screen name :) :)
User avatar
Terry
Admiral
Posts: 1487
Joined: Thu Feb 19, 2004 2:35 pm
Sailboat: MacGregor 26M
Location: Vancouver, B.C. Canada. '03 26M - New Yamaha 70

Re: how big are your FENDERS / rubbing pounch?

Post by Terry »

I don't know the dimensions of mine but they are called size G4. I originally got the boat with the G3 size but found them to be a bit undersize. If you can change the order, do so and get the next size up, you won't regret it. :wink:
User avatar
Miss_Dallie
Chief Steward
Posts: 59
Joined: Mon Apr 11, 2011 1:23 pm
Sailboat: MacGregor 26M
Location: Corona, CA: Miss Dallie: E-TEC 60

Re: how big are your FENDERS / rubbing pounch?

Post by Miss_Dallie »

FinallySailing wrote: Being able to drop them at the right hight is more important.
I agree, dropping the fender to the right height is more important. I bought straps with velcro that attaches to the stanchions but at their longest, they are not long enough. Now I just use some line and ta-da problem fixed. I should have saved my money. As for how big the fenders I bought are, I'd have to guess, but they aren't that big. We just got our :macm: and haven't yet done any mods for storage, space is a premium in the cabin.

Hope this tid bit helps.

Ron
User avatar
Divecoz
Admiral
Posts: 3803
Joined: Sat Oct 16, 2004 2:54 pm
Sailboat: MacGregor 26M
Location: PORT CHARLOTTE FLORIDA 05 M Mercury 50 H.P. Big Foot Bill at Boats 4 Sail is my Hero

Re: how big are your FENDERS / rubbing pounch?

Post by Divecoz »

I have SS Baskets attached to the Front and the Rear stanchions ( one side) I have IIRC G4's 2 is plenty in most cases and I have a few smaller ones in the V berth.. With the smaller units Placement is VERY Important!! Not So .. with the larger fenders..
User avatar
Herschel
Admiral
Posts: 1487
Joined: Wed Sep 28, 2005 4:22 pm
Sailboat: MacGregor 26X
Location: Orlando, Florida
Contact:

Re: how big are your FENDERS / rubbing pounch?

Post by Herschel »

I have chosen, and been well served with, six fenders, three to a side. I moor at a finger pier with another boat next to me on the adjacent finger pier. When the wind is blowing off the pier, and the forward crew is less experienced at nabbing the cleat with the boat hook, it is nice to have three nice fenders down on the outboard side. I hang the fenders from the two forward stanchions and one farther aft from the aft stanchion. After getting underway, I secure them to clamps attached to the lifelines. The size is approximately 6" diameter and 22-23" long.
User avatar
restless
First Officer
Posts: 421
Joined: Wed Aug 05, 2009 1:55 pm
Sailboat: MacGregor 26X
Location: Sunny South England....uk
Contact:

Re: how big are your FENDERS / rubbing pounch?

Post by restless »

massive!

Image


tho when sailing on the open sea we leave most of them at home :wink:
User avatar
frede
Engineer
Posts: 114
Joined: Thu Mar 24, 2011 6:16 am
Sailboat: MacGregor 26M
Location: Washington Sailing Marina, Alexandria VA - 2005 26M 50hp Honda - Kool Breeze
Contact:

Re: how big are your FENDERS / rubbing pounch?

Post by frede »

restless wrote:massive!
Image
Is that a "step" fender?
Post Reply