Why you attached fishfinder ? As I can see you have already Lorance including all these functions........
Where to begin
Re: Where to begin
J
Why you attached fishfinder ? As I can see you have already Lorance including all these functions........
Why you attached fishfinder ? As I can see you have already Lorance including all these functions........
- beene
- Site Admin
- Posts: 2546
- Joined: Tue Sep 19, 2006 5:31 pm
- Sailboat: MacGregor 26M
- Location: Ontario Canada, '07 26M, Merc 75 4s PEGASUS
Re: Where to begin
His massive Plotter does not include a fishfinder or transducer, so he had to get that separately.
I swear, sitting in front of his ped, I feel like the capt of the Enterprise.......
G
I swear, sitting in front of his ped, I feel like the capt of the Enterprise.......
G
- Highlander
- Admiral
- Posts: 5995
- Joined: Wed Sep 21, 2005 8:25 pm
- Sailboat: MacGregor 26M
- Location: Maccutter26M 2008 75HP Merc. 4/S Victoria BC. Can. ' An Hileanto'ir III '
- Contact:
Re: Where to begin
up-date bilge blower & wash down pump
http://i235.photobucket.com/albums/ee20 ... 0015-1.jpg
follow the link for more pics
pedestal more support
http://i235.photobucket.com/albums/ee20 ... 0004-1.jpg
http://i235.photobucket.com/albums/ee20 ... 010059.jpg
rudder cleats
http://i235.photobucket.com/albums/ee20 ... 010051.jpg
winch cleats raised
http://i235.photobucket.com/albums/ee20 ... 010067.jpg
bilge pump
http://i235.photobucket.com/albums/ee20 ... 010061.jpg
J
http://i235.photobucket.com/albums/ee20 ... 0015-1.jpg
follow the link for more pics
pedestal more support
http://i235.photobucket.com/albums/ee20 ... 0004-1.jpg
http://i235.photobucket.com/albums/ee20 ... 010059.jpg
rudder cleats
http://i235.photobucket.com/albums/ee20 ... 010051.jpg
winch cleats raised
http://i235.photobucket.com/albums/ee20 ... 010067.jpg
bilge pump
http://i235.photobucket.com/albums/ee20 ... 010061.jpg
J
-
Retcoastie
- Captain
- Posts: 673
- Joined: Sat Sep 16, 2006 7:00 am
- Sailboat: MacGregor 26X
- Location: Gray Hawk, Kentucky 2002 X "Last Flight"
Re: Where to begin
Impressive!
A question, and it is informational only. I'm not trying to start anything, just learn. In the 'winch cleats raised' pic, in the background is a car on the Genoa track. I was told that car was for the jib tract. Was I told incorrectly? Am I using the wrong car there?
Thanks
Ken
A question, and it is informational only. I'm not trying to start anything, just learn. In the 'winch cleats raised' pic, in the background is a car on the Genoa track. I was told that car was for the jib tract. Was I told incorrectly? Am I using the wrong car there?
Thanks
Ken
- beene
- Site Admin
- Posts: 2546
- Joined: Tue Sep 19, 2006 5:31 pm
- Sailboat: MacGregor 26M
- Location: Ontario Canada, '07 26M, Merc 75 4s PEGASUS
Re: Where to begin
No
You are correct. The cars are better suited for the cabin top and jib sheets.
The Genny or spin uses blocks on those aft tracks that pivot on springs allowing for the block to turn horizontal for the sheets to run evenly up to the winches.
G
You are correct. The cars are better suited for the cabin top and jib sheets.
The Genny or spin uses blocks on those aft tracks that pivot on springs allowing for the block to turn horizontal for the sheets to run evenly up to the winches.
G
-
Kelly Hanson East
- Admiral
- Posts: 1786
- Joined: Sat Apr 19, 2008 2:35 pm
- Sailboat: MacGregor 26X
- Location: Kelly Hanson Marine........Mac 26M Dealer......Freedom Boat Works
- Highlander
- Admiral
- Posts: 5995
- Joined: Wed Sep 21, 2005 8:25 pm
- Sailboat: MacGregor 26M
- Location: Maccutter26M 2008 75HP Merc. 4/S Victoria BC. Can. ' An Hileanto'ir III '
- Contact:
- Highlander
- Admiral
- Posts: 5995
- Joined: Wed Sep 21, 2005 8:25 pm
- Sailboat: MacGregor 26M
- Location: Maccutter26M 2008 75HP Merc. 4/S Victoria BC. Can. ' An Hileanto'ir III '
- Contact:
Re: Where to begin
Just an update
Heres how to make a screened bilge vent
http://i844.photobucket.com/albums/ab1/ ... 010001.jpg
three pieces the vent , cut a round piece of screening and a piece of plastic bottle that fits the inner dia. of the vent
http://i844.photobucket.com/albums/ab1/ ... 010003.jpg
and put them together you now have a sreened bilge vent no bee hives or spiders nests to worry about
http://i844.photobucket.com/albums/ab1/ ... 010004.jpg
the head vent open
http://i844.photobucket.com/albums/ab1/ ... 010009.jpg
closed
http://i844.photobucket.com/albums/ab1/ ... 010010.jpg
their is another one of these vents inside the bilge area at the v-berth infront of the ballast vent basin so I can vent out the bilge area or the head either one at a time or both together ! with the blower motor which is already mounted in the port stern
new radio & rear speakers installed they can be turned into the cabin or out into the cockpit
http://i844.photobucket.com/albums/ab1/ ... 010006.jpg
http://i844.photobucket.com/albums/ab1/ ... 010007.jpg
http://i844.photobucket.com/albums/ab1/ ... 010008.jpg
SS Stern anchor mounted in an pollished Allum tube
http://i844.photobucket.com/albums/ab1/ ... 010013.jpg
Still working away at my SS arch with which incorp. my 2-1 rudder mod , my dinghy davits , my backstay on a 4ft traveller, my antenna base mount above
http://i844.photobucket.com/albums/ab1/ ... 010014.jpg
http://i844.photobucket.com/albums/ab1/ ... 010016.jpg
http://i844.photobucket.com/albums/ab1/ ... 010018.jpg
heres a short video
http://s844.photobucket.com/albums/ab1/ ... 010011.flv
Heres how to make a screened bilge vent
http://i844.photobucket.com/albums/ab1/ ... 010001.jpg
three pieces the vent , cut a round piece of screening and a piece of plastic bottle that fits the inner dia. of the vent
http://i844.photobucket.com/albums/ab1/ ... 010003.jpg
and put them together you now have a sreened bilge vent no bee hives or spiders nests to worry about
http://i844.photobucket.com/albums/ab1/ ... 010004.jpg
the head vent open
http://i844.photobucket.com/albums/ab1/ ... 010009.jpg
closed
http://i844.photobucket.com/albums/ab1/ ... 010010.jpg
their is another one of these vents inside the bilge area at the v-berth infront of the ballast vent basin so I can vent out the bilge area or the head either one at a time or both together ! with the blower motor which is already mounted in the port stern
new radio & rear speakers installed they can be turned into the cabin or out into the cockpit
http://i844.photobucket.com/albums/ab1/ ... 010006.jpg
http://i844.photobucket.com/albums/ab1/ ... 010007.jpg
http://i844.photobucket.com/albums/ab1/ ... 010008.jpg
SS Stern anchor mounted in an pollished Allum tube
http://i844.photobucket.com/albums/ab1/ ... 010013.jpg
Still working away at my SS arch with which incorp. my 2-1 rudder mod , my dinghy davits , my backstay on a 4ft traveller, my antenna base mount above
http://i844.photobucket.com/albums/ab1/ ... 010014.jpg
http://i844.photobucket.com/albums/ab1/ ... 010016.jpg
http://i844.photobucket.com/albums/ab1/ ... 010018.jpg
heres a short video
http://s844.photobucket.com/albums/ab1/ ... 010011.flv
- The Mutt
- Captain
- Posts: 611
- Joined: Thu Nov 29, 2007 12:28 pm
- Sailboat: MacGregor 26X
- Location: Springwood, NSW, devinetemptations.com/macgregor26x.htm
- Contact:
Re: Where to begin
Highlander, when you push the correct button does a cocktail bar appear from hiding, romantic music start and the lighting dim in a James Bond/Matt Helm fashion?
Glenn
Glenn
- The Mutt
- Captain
- Posts: 611
- Joined: Thu Nov 29, 2007 12:28 pm
- Sailboat: MacGregor 26X
- Location: Springwood, NSW, devinetemptations.com/macgregor26x.htm
- Contact:
Re: Where to begin
I still can't work out where to put the ejection seat, too far forward could leave a stain on the boat with the boom acting as a base ball bat ..... I know, an trap door in the cockpit to the shark tank.
I really need a holiday!!!
Can you tell?
Glenn
I really need a holiday!!!
Can you tell?
Glenn
- Highlander
- Admiral
- Posts: 5995
- Joined: Wed Sep 21, 2005 8:25 pm
- Sailboat: MacGregor 26M
- Location: Maccutter26M 2008 75HP Merc. 4/S Victoria BC. Can. ' An Hileanto'ir III '
- Contact:
Re: Where to begin
Glen
Just watch what button you push !!! because they can be missleading
would'nt want to see you become a shooting Star !!!!!!!!!!!!!!!!!!!!!
J
Just watch what button you push !!! because they can be missleading
would'nt want to see you become a shooting Star !!!!!!!!!!!!!!!!!!!!!
J
- c130king
- Admiral
- Posts: 2730
- Joined: Sun Nov 05, 2006 5:30 pm
- Sailboat: MacGregor 26M
- Location: Wiggins, MS --- '05 26M "König" w/ 40hp Merc
- Contact:
Re: Where to begin
Can the sharks have "laser beams" attached to their heads?The Mutt wrote:I know, an trap door in the cockpit to the shark tank.
[* Insert picture of Dr. Evil and Mini Me here...can't do pics at work...photobucket is blocked *]
Jim
- The Mutt
- Captain
- Posts: 611
- Joined: Thu Nov 29, 2007 12:28 pm
- Sailboat: MacGregor 26X
- Location: Springwood, NSW, devinetemptations.com/macgregor26x.htm
- Contact:
Re: Where to begin
Highlander wrote:Glen
Just watch what button you push !!! because they can be missleading![]()
![]()
![]()
![]()
would'nt want to see you become a shooting Star !!!!!!!!!!!!!!!!!!!!!![]()
![]()
![]()
J
Shooting star? ... Starting to sound like something from the space program, or a Hollywood Blonde! .... OH I get it, you have a floating Hollwood casting couch, push the button for the Cocktail cabinet, lighting and music, you sly dog!
Glenn
