A forum for discussing topics relating to MacGregor Powersailor Sailboats
rick retiree
Chief Steward
Posts: 93 Joined: Wed Aug 31, 2005 10:27 amLocation: Worth,Ill.
Post
by rick retiree Sun Apr 27, 2008 8:41 am
I know this is a long shot but have any of you Macmen know where to buy plastic plugs like on the X? Recently converted rear seat hinge from port to starboard side and had to drill 2 inch hole to do so & now need plug.
tangentair
Admiral
Posts: 1234 Joined: Mon Jan 22, 2007 11:59 amSailboat: MacGregor 26MLocation: Highland Park, IL ...07M...Merc 50 BF...Mila K
Post
by tangentair Sun Apr 27, 2008 9:09 am
May not be the best place but as a last resort
http://www.mcmaster.com/ and put plastic finishing plug in the "find products tabs" search box.
tlperrine
Deckhand
Posts: 48 Joined: Sun Jan 04, 2004 4:36 pmLocation: Conifer, Colorado
Post
by tlperrine Sun Apr 27, 2008 3:40 pm
I have had good luck at Ace, Lowes, and Home Depot. Go to the specialty hardware section. Usually tons of bins of all kinds of odds and ends.
pokerrick1
Admiral
Posts: 2269 Joined: Sun Aug 27, 2006 7:20 pmSailboat: Venture 23Location: Las Vegas, NV (Henderson, near Lake Mead)
Post
by pokerrick1 Sun Apr 27, 2008 5:36 pm
You can also use small mirrors instead of plugs.
Rick
RickJ
First Officer
Posts: 292 Joined: Mon Oct 01, 2007 2:39 pmSailboat: MacGregor 19Location: Isle of Wight, UK - '94 19 + Tohatsu MFS30
Post
by RickJ Mon Apr 28, 2008 2:51 am
Check
this thread .
I arranged with Bob to buy some of his spares, I'm sure he's got more left.
albion
First Officer
Posts: 280 Joined: Sun Apr 09, 2006 11:25 pmLocation: Medina Ohio 2007 Mac26M Suzuki 50hp Hull#M1494g607
Post
by albion Tue Apr 29, 2008 8:53 pm
Have you tried talking to Bill b4s
