My new pedestal accessories installed

A forum for discussing boat or trailer repairs or modifications that you have made or are considering.
Post Reply
Sheppie62
First Officer
Posts: 351
Joined: Thu Sep 28, 2017 1:04 pm
Sailboat: MacGregor 26X
Location: Mission Bay San Diego

My new pedestal accessories installed

Post by Sheppie62 »

Just finished putting all the stuff I wanted on the Pedestal, thought I’d share it with you guys. Feel free to critique if you want, you won’t hurt my feelings :D yes I can see over top of multifunction display with my raised seat cushion (not shown) under construction. I am planning on installing hydraulic auto pilot on Inside of transom, and control with multifunction display and maybe a remote. Trying to figure out how to put a small water tight compartment in hole Under steering wheel for wallet, keys, etc.
Image

Image
User avatar
Jimmyt
Admiral
Posts: 3402
Joined: Sat Jul 18, 2015 9:52 am
Sailboat: MacGregor 26M
Location: Mobile AL 2013 26M, 60 Etec

Re: My new pedestal accessories installed

Post by Jimmyt »

Outstanding!
Jimmyt
P-Cub-Boo
2013 26M, Etec 60, roller Genoa, roller main
Cruising Waters: Mobile Bay, Western Shore, Fowl River
User avatar
Highlander
Admiral
Posts: 5995
Joined: Wed Sep 21, 2005 8:25 pm
Sailboat: MacGregor 26M
Location: Maccutter26M 2008 75HP Merc. 4/S Victoria BC. Can. ' An Hileanto'ir III '
Contact:

Re: My new pedestal accessories installed

Post by Highlander »

Very nice u did similar to what I did

Image


after I done the final fit I replaced this center swivel bolt with a security bolt which requires a special tool too remove it
Image

I also replaced the mounting knobs with security locking ones which also requires a special tool
Image

something u might want to consider :wink: we r having a lot of boat break-ins since covid started & 6 boat thefts in our area at the marina,s & boats on the hook :(
hate to see u lose that nice MDU

J 8)
User avatar
Highlander
Admiral
Posts: 5995
Joined: Wed Sep 21, 2005 8:25 pm
Sailboat: MacGregor 26M
Location: Maccutter26M 2008 75HP Merc. 4/S Victoria BC. Can. ' An Hileanto'ir III '
Contact:

Re: My new pedestal accessories installed

Post by Highlander »

Maybe something like this would work for ur pedestal storage

https://victory-products.com/collection ... /aa13562sb

Hope this helps J 8)
Sheppie62
First Officer
Posts: 351
Joined: Thu Sep 28, 2017 1:04 pm
Sailboat: MacGregor 26X
Location: Mission Bay San Diego

Re: My new pedestal accessories installed

Post by Sheppie62 »

Thanks Highlander, nice setup! Like the swivel/ security bolts/ knobs. That hatch with bag inside was what I was thinking at first, but I could only use a 4” hatch and bag, and wouldn’t really hold much. Think I’m going to make a box out of 1/4” starboard, screw it together. That way I can get the perfect size/ shape and can change later if needed. I haven’t thought about security issues yet.
User avatar
LordElsinore
First Officer
Posts: 255
Joined: Thu Sep 02, 2021 6:09 pm
Sailboat: MacGregor 26M
Location: Salt Lake City, UT - "As You Wish" - Suzuki DF60A

Re: My new pedestal accessories installed

Post by LordElsinore »

Love the pedestal setups, guys. Thanks for sharing! I did not realize that "pedestal envy" was a thing until I saw your pictures. Now I have it.

Sheppie62, what is the function of those "black knob" looking things on the top and side of your pedestal? Hand holds? Line cleats? Golf ball cleaners?
User avatar
Highlander
Admiral
Posts: 5995
Joined: Wed Sep 21, 2005 8:25 pm
Sailboat: MacGregor 26M
Location: Maccutter26M 2008 75HP Merc. 4/S Victoria BC. Can. ' An Hileanto'ir III '
Contact:

Re: My new pedestal accessories installed

Post by Highlander »

LordElsinore wrote: Thu Oct 07, 2021 11:26 am Love the pedestal setups, guys. Thanks for sharing! I did not realize that "pedestal envy" was a thing until I saw your pictures. Now I have it.

Sheppie62, what is the function of those "black knob" looking things on the top and side of your pedestal? Hand holds? Line cleats? Golf ball cleaners?
If u zoom into my second pic u,ll see on the starboard side of my pedestal guard u can see a black knob U-bolted onto it then the black screw knob on top middle of clamp which is clamped onto the said knob other end of clamp is clamped onto the knob on back of the empty mounting plate

Image

Image

J 8)
User avatar
LordElsinore
First Officer
Posts: 255
Joined: Thu Sep 02, 2021 6:09 pm
Sailboat: MacGregor 26M
Location: Salt Lake City, UT - "As You Wish" - Suzuki DF60A

Re: My new pedestal accessories installed

Post by LordElsinore »

Highlander wrote: Thu Oct 07, 2021 12:42 pm If u zoom into my second pic u,ll see on the starboard side of my pedestal guard u can see a black knob U-bolted onto it then the black screw knob on top middle of clamp which is clamped onto the said knob other end of clamp is clamped onto the knob on back of the empty mounting plate
Ah, so some kind of pivoting, removable mount that you can attach different things to? Nice
Sheppie62
First Officer
Posts: 351
Joined: Thu Sep 28, 2017 1:04 pm
Sailboat: MacGregor 26X
Location: Mission Bay San Diego

Black knobs -Ram Ball Mounts

Post by Sheppie62 »

Lord Elsinore, those black knobs are Ram Ball Mounts. The side one is for my IPhone viewable while driving/ sailing. The other 3 on top are for other passengers phones/ or an action cam/ or mounting an iPad viewable form the side.There is a usb charging port on the side also. We have an iPad Pro 12.9” which is our Netflix’s monitor for watching downloaded movies / shows. We suction cup a mount above the Vee Berth area and watch tv in bed, it’s amazing, like a big screen tv. Think I will glue a mount up there permanently with 5200 adhesive. I’m planned on putting some stainless hoops for grab handles, protect people from tearing things off the pedestal , safety
Image

Image
Last edited by Sheppie62 on Fri Oct 08, 2021 8:08 am, edited 1 time in total.
Sheppie62
First Officer
Posts: 351
Joined: Thu Sep 28, 2017 1:04 pm
Sailboat: MacGregor 26X
Location: Mission Bay San Diego

Re: My new pedestal accessories installed

Post by Sheppie62 »

Oh btw the material is from cutting boards from Sam’s Club/ Amazon/ scrap from Industrial plastic supply house Anaheim Ca.
Image

Image
OverEasy
Admiral
Posts: 2885
Joined: Mon Sep 28, 2020 11:16 am
Sailboat: MacGregor 26X
Location: NH & SC

Re: My new pedestal accessories installed

Post by OverEasy »

Nice Job Sheppie62!!!
Kool!!! 😎 & Slick!!!👍
adudinsk
First Officer
Posts: 495
Joined: Tue Aug 27, 2019 12:53 pm
Sailboat: MacGregor 26M
Location: Belle River Ontario

Re: My new pedestal accessories installed

Post by adudinsk »

Where is the BEER ON TAP going? Cockpit or the galley?
Post Reply