Being aluminum, it's not magnetic. I can't find a manufacturer anywhere. Any help in finding a replacement pole is appreciated.
Bimini help
- dlandersson
- Admiral
- Posts: 4988
- Joined: Fri Aug 27, 2010 10:00 am
- Sailboat: MacGregor 26X
- Location: Michigan City
Bimini help
Ok, while setting up my Bimini, one of the support poles slide off and fell into the water - where it promtly sank.
Being aluminum, it's not magnetic. I can't find a manufacturer anywhere. Any help in finding a replacement pole is appreciated.



Being aluminum, it's not magnetic. I can't find a manufacturer anywhere. Any help in finding a replacement pole is appreciated.
- Tomfoolery
- Admiral
- Posts: 6135
- Joined: Tue Jul 05, 2011 7:42 am
- Sailboat: MacGregor 26X
- Location: Rochester, NY '99X BF50 'Tomfoolery'
Re: Bimini help

Not kidding. Easier than making a new one. There may be divers that work in your marina regularly who could do down and grab it for a twenty, while they're already there.
Just watch out for stray voltage from someone's boat, since you're in fresh water.
- Highlander
- Admiral
- Posts: 5998
- Joined: Wed Sep 21, 2005 8:25 pm
- Sailboat: MacGregor 26M
- Location: Maccutter26M 2008 75HP Merc. 4/S Victoria BC. Can. ' An Hileanto'ir III '
- Contact:
Re: Bimini help
I dropped my cell ph. in about 16ft of water after about 8-9 dives with flippers & goggles i could still not find it so I see this guy standing on the dock talking on his cell & asked him if he could call my cell # so he said OK down I went again followed the ring ding found my cell ph answered my cell & told him thx alot for ur help, he said u sound like u r in a fish tank !! when I came back up to the surface he was long gone , laid my ph out in the sun in a bag of rice for three days , after it dried out I no longer sounded like I was talking in a fish tank ! Just saying
Anyways u could try using one of these submersable camera's to locate it , then buy an alum magnate if u can find one as they r very hard to find , then tie a string to it & go fishing just saying
How come nobody else comes up with these idea's
J
Anyways u could try using one of these submersable camera's to locate it , then buy an alum magnate if u can find one as they r very hard to find , then tie a string to it & go fishing just saying
How come nobody else comes up with these idea's
J
- seahouse
- Admiral
- Posts: 2182
- Joined: Sun Dec 07, 2008 9:17 pm
- Sailboat: MacGregor 26M
- Location: Niagara at Lake Erie, Ontario. 2011 MacM, 60 hp E-Tec
- Contact:
Re: Bimini help
then buy an alum magnate if u can find one as they r very hard to find .
J --yer being silly now. While it is true that an aluminum magnates are hard to find, they are harder to buy because they are usually billionaires
-B
Ps. Sorry. It's late. Couldn't help myself.
- seahouse
- Admiral
- Posts: 2182
- Joined: Sun Dec 07, 2008 9:17 pm
- Sailboat: MacGregor 26M
- Location: Niagara at Lake Erie, Ontario. 2011 MacM, 60 hp E-Tec
- Contact:
Re: Bimini help
dl -- did you lose it at your slip (easier to find, obviously) or in the middle of nowhere?
- dlandersson
- Admiral
- Posts: 4988
- Joined: Fri Aug 27, 2010 10:00 am
- Sailboat: MacGregor 26X
- Location: Michigan City
Re: Bimini help
Slip, 7.5 feet of water - lots of growth - do not see it.
seahouse wrote:dl -- did you lose it at your slip (easier to find, obviously) or in the middle of nowhere?
- Russ
- Admiral
- Posts: 8359
- Joined: Thu Oct 11, 2007 12:01 pm
- Sailboat: MacGregor 26M
- Location: Bozeman, Montana "Luna Azul" 2008 M 70hp Suzi
Re: Bimini help
I dropped my watch over in the slip. Took a long net and scooped the bottom. I was shocked when it came up in the net.
Poles are tricky though. They don't sink straight down. Probably took a sloped drop.
That's relatively shallow though. I'd try the snorkel.
You will probably have to fabricate one from parts. I can't tell what that black thing is on the right of your photo. The other stuff is easy to purchase.
http://www.overtons.com/Boating-Marine/ ... ccessories
http://www.sailrite.com/Hardware#!Hardware
Poles are tricky though. They don't sink straight down. Probably took a sloped drop.
That's relatively shallow though. I'd try the snorkel.
You will probably have to fabricate one from parts. I can't tell what that black thing is on the right of your photo. The other stuff is easy to purchase.
http://www.overtons.com/Boating-Marine/ ... ccessories
http://www.sailrite.com/Hardware#!Hardware
- Highlander
- Admiral
- Posts: 5998
- Joined: Wed Sep 21, 2005 8:25 pm
- Sailboat: MacGregor 26M
- Location: Maccutter26M 2008 75HP Merc. 4/S Victoria BC. Can. ' An Hileanto'ir III '
- Contact:
Re: Bimini help
Gez thats not deep atall get down there with a weed wacker then shine one of the 2 million wat search lights @ the bottom & look for a refection or tie a string to the matching pole from the other side & let it drop over board @ the same loction & see if it follows the same path to the bottom then go fishing for kissing cousinsdlandersson wrote:Slip, 7.5 feet of water - lots of growth - do not see it.![]()
seahouse wrote:dl -- did you lose it at your slip (easier to find, obviously) or in the middle of nowhere?
or call in the fire dept. & ask them to pump down the water level to see if u can find ur close friend who fell O/B
J
- Highlander
- Admiral
- Posts: 5998
- Joined: Wed Sep 21, 2005 8:25 pm
- Sailboat: MacGregor 26M
- Location: Maccutter26M 2008 75HP Merc. 4/S Victoria BC. Can. ' An Hileanto'ir III '
- Contact:
Re: Bimini help
Hi B, FYI I really did dive down into 16ft water to retrieve my cell ph about 8-9 times using snortle, finns & goggles & to the amazement of about 25 people watching me from the docks who though I was a little crazy until they seen that I found it !!seahouse wrote:then buy an alum magnate if u can find one as they r very hard to find .![]()
J --yer being silly now. While it is true that an aluminum magnates are hard to find, they are harder to buy because they are usually billionaires![]()
![]()
![]()
![]()
-B
Ps. Sorry. It's late. Couldn't help myself.
J
PS I was a little
- seahouse
- Admiral
- Posts: 2182
- Joined: Sun Dec 07, 2008 9:17 pm
- Sailboat: MacGregor 26M
- Location: Niagara at Lake Erie, Ontario. 2011 MacM, 60 hp E-Tec
- Contact:
Re: Bimini help
That was an amazing story!
I didn't doubt that part of the story either- sometimes the greatest things happen when you reach the stage of having nothing to lose. Of course, I was being facetious about yer spellin' of magnate vs magnet!!!
-B.
ps. I've been diving in some areas where the "bottom" is not well-defined. That is, the muck merely gets denser and denser (and darker and darker) over a couple of feet. Yuk - You are no longer looking for something on a 2-D plane, it's now a 3-D space, expanding as you stir it up….downright creepy, and good luck finding something small in that!
I didn't doubt that part of the story either- sometimes the greatest things happen when you reach the stage of having nothing to lose. Of course, I was being facetious about yer spellin' of magnate vs magnet!!!
-B.
ps. I've been diving in some areas where the "bottom" is not well-defined. That is, the muck merely gets denser and denser (and darker and darker) over a couple of feet. Yuk - You are no longer looking for something on a 2-D plane, it's now a 3-D space, expanding as you stir it up….downright creepy, and good luck finding something small in that!
- Hamin' X
- Site Admin
- Posts: 3466
- Joined: Sat Aug 27, 2005 6:02 pm
- Sailboat: MacGregor 26X
- Location: Hermiston, OR-----------2001 26X DF-50 Suz---------------(Now Sold)
- Contact:
Re: Bimini help
I'll bet that if you contact Bill@Boats4Sail that he will be able to identify the manufacturer of your bimini. A lot of folks in your area swear by him.
http://www.boats4sail.info/contact-us.html
~Rich
http://www.boats4sail.info/contact-us.html
~Rich
- Sloop John B
- Captain
- Posts: 871
- Joined: Sat Jan 03, 2004 2:45 am
- Sailboat: MacGregor 26X
- Location: Florida 'Big Bend'. 02x Yamaha T50
Re: Bimini help
You'll have to send for the missing part from the manufacturer. I'll take a look at mine to see if it's identified. Contact Tatoo (spelling) Boats (Roger's daughter) to see if you can learn where to go.
Sloop
Sloop
- RobertB
- Admiral
- Posts: 1863
- Joined: Sun Jun 05, 2011 7:42 pm
- Sailboat: MacGregor 26M
- Location: Clarksville, MD
Re: Bimini help
It looks to me that you lost a short straight pole. This is really a very simple part to make. Earlier someone listed a link for SailRite - I have used them to get parts for mine. All you need are two end fittings and a section of straight aluminium tubing.

