Venture 222 pulpit, stern rail and stanchions
-
briantousignant
- Just Enlisted
- Posts: 15
- Joined: Wed Sep 26, 2012 3:40 am
- Sailboat: Venture 2-22
Venture 222 pulpit, stern rail and stanchions
My boat was originally equipped with a complete lifeline system which was removed. Can anyone help me find a source, such as salvaged boat ?
- kmclemore
- Site Admin
- Posts: 6290
- Joined: Sun Feb 08, 2004 9:24 am
- Sailboat: MacGregor 26X
- Location: Ambler, PA -- MACX2018A898 w/ Suzuki DF60AV -- 78 BW Harpoon 4.6 -- 2018 Tahoe 550TF w/ 150 Merc
Re: Venture 222 pulpit, stern rail and stanchions
I believe all of the MacGregor railings, stanchions and swim ladders were made by Railmakers.
http://railmakers.com/yachts/macgregor/ ... -index.htm
I am sure they have the specifications for the OEM design of your pulpit and stanchions if you want a new set. Not sure where you'd find a used one, unless a while boat is being scrapped.
The lifelines themselves were swaged stainless cable. Blue Water Yachts would likely be able to supply that.
http://railmakers.com/yachts/macgregor/ ... -index.htm
I am sure they have the specifications for the OEM design of your pulpit and stanchions if you want a new set. Not sure where you'd find a used one, unless a while boat is being scrapped.
The lifelines themselves were swaged stainless cable. Blue Water Yachts would likely be able to supply that.
- Freedom77
- First Officer
- Posts: 481
- Joined: Sun Nov 14, 2010 9:43 am
- Sailboat: Venture 25
- Location: Lake Mead, Nevada '76 V-25 #928
Re: Venture 222 pulpit, stern rail and stanchions
I don't think that the factory put stern pulpits on the early original 22's. Of course I could be wrong, just ask my family. 
-
PNKFLOYD
- Just Enlisted
- Posts: 19
- Joined: Tue Feb 05, 2013 11:34 am
- Sailboat: Venture 2-24
- Location: Central Alabama-sailing mud puddles
Re: Venture 222 pulpit, stern rail and stanchions
My '71 V-22 has the bow pulpit and side lifelines, but no rear pulpit.
It also has the cutout on the port stern for an outboard engine.
Hope this helps you.
Mike
It also has the cutout on the port stern for an outboard engine.
Hope this helps you.
Mike
