Hello everyone. After a storm bent my mast in two, I needed a replacement. I ordered a replacement from BWY, but it seems they missed drilling the holes for the upper shroud hasp. Does anyone have the measurement for this?
Thanks in advance,
Terry
Help - new mast need measurements
-
Terry
- Admiral
- Posts: 1487
- Joined: Thu Feb 19, 2004 2:35 pm
- Sailboat: MacGregor 26M
- Location: Vancouver, B.C. Canada. '03 26M - New Yamaha 70
Re: Help - new mast need measurements
It (the upper shroud hound) is exactly 6' or 72" down from the very top of the mast. I just measured it on my own bent mast I have in the back yard. (30' 26M mast)TAM wrote:Hello everyone. After a storm bent my mast in two, I needed a replacement. I ordered a replacement from BWY, but it seems they missed drilling the holes for the upper shroud hasp. Does anyone have the measurement for this?
Thanks in advance,
Terry
-
Highlander
- Admiral
- Posts: 5995
- Joined: Wed Sep 21, 2005 8:25 pm
- Sailboat: MacGregor 26M
- Location: Maccutter26M 2008 75HP Merc. 4/S Victoria BC. Can. ' An Hileanto'ir III '
- Contact:
Re: Help - new mast need measurements
Remember guys they were two diff masts for the 
so not sure if they kept the same measurements
J
so not sure if they kept the same measurements
J