Pics of the 1990 26s - Interior. ($1800)
Posted: Sun Jul 03, 2011 11:07 pm
All,
Here are the pics for the interior..... not many Farkles inside (Motorcycle term....'fancy sparkles')
http://www.flickr.com/photos/waynedenni ... 891825756/
Broken Mirror
Bathroom wood-like material is 'ok'. (servicable)
Simple sink.
Under sink is a wiring mess.
110v batt trickle charger
Extra Fuseblock (pic coming)
autohelm wiring
Hole in the boat to send out bilgewater...(near sink water tube)
Seat cushions are ok, material is light color and not of our choice. Servicable for now.
One of the Seating areas has a little storage drop in....(was that original?)
I am dropping it off at the stockton Lake marina this week...
Getting the engine and fuel cell all set up. (Where do people keep theirs usually?)
Rigging setup (Rearstay has a kink....replace)
Running Rerig (Washed all the lines)
New and additional FuseBlocks.
When I was washing it off...I saw some dock damage repairs. Couldnt tell when it was dirty.
Will address when the bottom gets redone...1yr
Mast Raising system looks functional...GREAT!
Since I have an autohelm computer...is it a good idea to get the parts to finish it off..or start with a brand new one?
(3 of 10 priority right now)
Question.
After getting the basics to conform to Minimum sailing gear...
I am looking to do some of the following...any advice on what you would recommend as Valuable/Highest return on investment/appreciation would be helpful to me...what do you think?
1 Relocate Battery to Bow+Battery Box+Add another battery
2 install a wiring loom (+ heatshrink)
3 Add bigger deck hatches to forward berth (2)
- 1 horizontal (Drop in stowage)
- 1 vertical (pole stowage)
4 Rope Locker (Porta Potty area)
5 Rope Locker (Laz area)
6 Fuel Cell storage (Laz area)
7 Good Stereo - Cabin Speakers appear to be really good. (CD/DVD)
Has anybody tried to install Redlights inside their Boat Cabin before? (Like what nicer Semi-Truck interiors use)
If not...they are great to provide light without affecting nightvision.
Thanks to the Forum!
Here are the pics for the interior..... not many Farkles inside (Motorcycle term....'fancy sparkles')
http://www.flickr.com/photos/waynedenni ... 891825756/
Broken Mirror
Bathroom wood-like material is 'ok'. (servicable)
Simple sink.
Under sink is a wiring mess.
110v batt trickle charger
Extra Fuseblock (pic coming)
autohelm wiring
Hole in the boat to send out bilgewater...(near sink water tube)
Seat cushions are ok, material is light color and not of our choice. Servicable for now.
One of the Seating areas has a little storage drop in....(was that original?)
I am dropping it off at the stockton Lake marina this week...
Getting the engine and fuel cell all set up. (Where do people keep theirs usually?)
Rigging setup (Rearstay has a kink....replace)
Running Rerig (Washed all the lines)
New and additional FuseBlocks.
When I was washing it off...I saw some dock damage repairs. Couldnt tell when it was dirty.
Will address when the bottom gets redone...1yr
Mast Raising system looks functional...GREAT!
Since I have an autohelm computer...is it a good idea to get the parts to finish it off..or start with a brand new one?
(3 of 10 priority right now)
Question.
After getting the basics to conform to Minimum sailing gear...
I am looking to do some of the following...any advice on what you would recommend as Valuable/Highest return on investment/appreciation would be helpful to me...what do you think?
1 Relocate Battery to Bow+Battery Box+Add another battery
2 install a wiring loom (+ heatshrink)
3 Add bigger deck hatches to forward berth (2)
- 1 horizontal (Drop in stowage)
- 1 vertical (pole stowage)
4 Rope Locker (Porta Potty area)
5 Rope Locker (Laz area)
6 Fuel Cell storage (Laz area)
7 Good Stereo - Cabin Speakers appear to be really good. (CD/DVD)
Has anybody tried to install Redlights inside their Boat Cabin before? (Like what nicer Semi-Truck interiors use)
If not...they are great to provide light without affecting nightvision.
Thanks to the Forum!