Page 3 of 3

Re: New glass 2

Posted: Wed Jun 29, 2016 6:31 pm
by arknoah
NiceAft wrote:I have been waiting to post a photograph until I have actually washed and waxed my white :macm: .

There are many varied products, with different levels of work involved. I like good results with less effort :D

Here is a picture of Nice Aft after washing and using good old Turtle Wax (squeeze bottle). Easy on, and easy off. I have been using this for most of the twelve years I have owned Nice Aft. You just do not need any expensive, or technical procedures. :wink:

Easy on and easy off with great results. As they say, “a picture is worth a thousand words.” By the way, being a white hull, reflections don't appear as vivid as a dark colored hull, yet look at the results.

Ray
Image
Is this the Turtle Wax that you apply on a wet surface then just wipe off like I use on my car? In any case, your hull looks great!

Re: New glass 2

Posted: Wed Jun 29, 2016 7:14 pm
by NiceAft
Yes.

Turtle Wax Hardshell in a squeeze bottle. The same stuff you use on your car.

Wash, compound, wax, lunch. The paste wax version does not state “last twelve months”, the squeeze bottle does.

Ray

Re: New glass 2

Posted: Thu Jun 30, 2016 8:58 am
by Wind Chime
I always assumed there was a difference in the actual polish product between what should be used for a;
- metal car with a paint finish
verses
- fiberglass boat with a gelcoat finish

Or is this just all marking ploys?