Page 2 of 2

Re: How do I make a msp

Posted: Wed Jun 29, 2016 2:33 pm
by Kelly
Thanks every one for the info on the Msp. Keep sending the info

Tx again

Re: How do I make a msp

Posted: Wed Jun 29, 2016 2:40 pm
by Tomfoolery
Look closely at the eye straps at the top of the two MRS poles. The bolts go through both straps and the pole, nutted with nylon insert locknuts (aka 'nylocks'). That way the load from the deck anchor into one eye strap passes through the bolts into the other eye strap on its way to the mast. The only load on the pole is compression via shear in the bolts.

Image

Image

Just something to be aware of.