Page 2 of 2

Re: Custom Boat Cover

Posted: Fri Oct 09, 2009 8:59 am
by kmclemore
RussMT wrote:This is not my boat, but I got this from somewhere on this site and this is what I'm gonna do this year. Bend the PVC pipe into an upside down U and attach them to the stanchions. It looks like a great way to keep rain and snow from building up.
Mine looks just the same, though I don't tie down the mast - I just bolt it to the mast crutch.

Re: Custom Boat Cover

Posted: Fri Oct 09, 2009 1:13 pm
by Steve
Is that simply one solid piece of pvc from one stanchion to the other, that would be too easy! :)
RussMT wrote:This is not my boat, but I got this from somewhere on this site and this is what I'm gonna do this year. Bend the PVC pipe into an upside down U and attach them to the stanchions. It looks like a great way to keep rain and snow from building up.

Image

Re: Custom Boat Cover

Posted: Fri Oct 09, 2009 2:43 pm
by SkiDeep2001
Chinook wrote:I've opted for the pvc tent frame, since we live in snow country. I set the peak up with 45 degree angle pitch, and padded the stanchion tops, as mentioned above. The snow slides off under some, but not all, conditions. I usually broom it off after each decent storm, so weight doesn't accumulate.
:o Yes, if you live in snow country make sure you brush that snow off. I went skiing for a week last winter and when I got back, this is what I found. I told my younger brother and his two 20+ year old kids who live with me to keep the snow off the portable garage. They obviously didn't do what I asked them. :cry: ImageImage 8) Rob

Re: Custom Boat Cover

Posted: Sat Oct 10, 2009 5:35 am
by K9Kampers
Steve, here a some links to pics of my bow frame cover:

Latest version with PVC saddle tees at waterline support: PIC 1
Original version showing wood strapping support at waterline & strongback support above mast:PIC 2
Bow profile from stern:PIC 3
Mast & strongback support secured to mast step plate, spreaders removed:PIC 4
20x30 tarp installed:PIC 5
PIC 6
PVC saddle tees & pipe support at waterline:PIC 7
PVC saddle tees:PIC 8

Re: Custom Boat Cover

Posted: Sat Oct 10, 2009 10:12 am
by Indulgence
This has worked well for me :!:

Image

Re: Custom Boat Cover

Posted: Sat Oct 10, 2009 10:32 am
by SkiDeep2001
Indulgence wrote:This has worked well for me :!:

Image
Indulgence,do you have to sweep the snow off the roof? :P :wink: 8) Rob

Re: Custom Boat Cover

Posted: Sun Oct 11, 2009 8:45 am
by Hamin' X
Let's all give a hearty welcome to Blue Reef Yatchs. They are now an official advertiser on this website. Watch for his banner ad soon. Please support him and the other advertisers that make this website possible.

Welcome aboard, Cameron.

~Rich

Re: Custom Boat Cover

Posted: Sun Oct 11, 2009 6:15 pm
by Russ
Hamin' X wrote:Let's all give a hearty welcome to Blue Reef Yatchs. They are now an official advertiser on this website. Watch for his banner ad soon. Please support him and the other advertisers that make this website possible.

Welcome aboard, Cameron.

~Rich
Welcome. However this thread doesn't quite seem like the place to do it.

Re: Custom Boat Cover

Posted: Sun Oct 11, 2009 6:42 pm
by Hamin' X
Cameron started this topic, by asking what kind of Custom Cover that members wanted. As well as being a Mac dealer, he makes and sells accesories for Macs.

~Rich