First time owner of a 26x what and how do I for bottom paint
First time owner of a 26x what and how do I for bottom paint
The bottom has never had anything on it. I have read lots about bottom prep but am still confused. Could someone please give me a list of where to start and where to finish. Start .ún .... Dewax bottom then what? I will be hauling it to San Carlos Mexico.
Last edited by Hamin' X on Mon Jul 25, 2016 6:18 am, edited 1 time in total.
Reason: Merged double posts.
Reason: Merged double posts.
- yukonbob
- Admiral
- Posts: 1918
- Joined: Mon Feb 14, 2011 6:54 pm
- Sailboat: Other
- Location: Whitehorse Yukon
Re: First time owner of a 26x what and how do I for bottom p
Epoxy barrier coat installed as per manufacturers instructions (dewax, sand) then your choice of bottom paint installed as per manufacturers instructions. The hard part is deciding which paint to go with as they all have different attributes.
Last edited by Hamin' X on Mon Jul 25, 2016 10:56 am, edited 1 time in total.
Reason: Repaired auto-correct mistake.
Reason: Repaired auto-correct mistake.
- BOAT
- Admiral
- Posts: 4969
- Joined: Fri Oct 19, 2012 5:12 pm
- Sailboat: MacGregor 26M
- Location: Oceanside, CA MACMJ213 2013 ETEC60
Re: First time owner of a 26x what and how do I for bottom p
I sailed San Carlos as a kid with my dad - it was great.
- yukonbob
- Admiral
- Posts: 1918
- Joined: Mon Feb 14, 2011 6:54 pm
- Sailboat: Other
- Location: Whitehorse Yukon
Re: First time owner of a 26x what and how do I for bottom p
Thanks Hamin, dam AC and typing on the phone never really works. 
- fouz
- First Officer
- Posts: 214
- Joined: Mon May 03, 2010 5:09 pm
- Sailboat: MacGregor 26X
- Location: Mobile AL. 2000X, T50 yamaha.
Re: First time owner of a 26x what and how do I for bottom p
I had a link to sumners page where he did a really good write up about it. good choices in paint for a trailable boat, the works. Maybe someone can find it or he can chime in.
-
paul I
- First Officer
- Posts: 421
- Joined: Tue Jul 19, 2011 5:43 am
- Sailboat: MacGregor 26X
- Location: Niagara Falls, NY 2000 26X w/Honda BF50 "NoneShallPass"
Re: First time owner of a 26x what and how do I for bottom p
The Interlux site will give you detailed instructions on how to do this.
The hardest part is the sanding. The entire lower hull will need to be blasted or sanded. I used 60 grit on an orbital sander. Followed by cleaner to remove any remaining residue. Then three coats of 2 part epoxy paint and a few coats of anti foul.
The hardest part is the sanding. The entire lower hull will need to be blasted or sanded. I used 60 grit on an orbital sander. Followed by cleaner to remove any remaining residue. Then three coats of 2 part epoxy paint and a few coats of anti foul.
Re: First time owner of a 26x what and how do I for bottom p
Thanks a lot. I ordered the Interprotect 2000 and the Micron CSC. Start tomorrow or the next day with the sanding.
Thx
Thx
