Total M26 production to date?

A forum for discussing topics relating to MacGregor Powersailor Sailboats
Locked
macxintosh
Posts: 7
Joined: Wed Jun 23, 2004 9:24 am

Total M26 production to date?

Post by macxintosh »

My dealer a while back mentioned that a total of about 5500-6000 Mac X were built. Also that M26 (all models) to date is about 18K-20K boats.

Can anyone comment about these numbers?
User avatar
richandlori
Admiral
Posts: 1695
Joined: Wed Aug 18, 2004 8:08 pm
Location: Living Aboard in Morro Bay, CA
Contact:

Post by richandlori »

My 2004 M hull No. 530 was built in April of O4. Does anyone know the hull numbers of New M's rolling out of the factory?

Rich
Bill at BOATS 4 SAIL
Admiral
Posts: 1006
Joined: Sat Jan 10, 2004 7:28 pm
Sailboat: MacGregor 26D
Location: Oconomowoc, WI

Post by Bill at BOATS 4 SAIL »

I have # 830 being shipped now.
User avatar
nemo
Engineer
Posts: 143
Joined: Sun Mar 20, 2005 4:39 pm
Location: Aloha, Oregon, '05 M, Suz70, "Nemo"

Post by nemo »

Mine is vin MACM0843B505. Can someone tell what the "843" means versus the "505"? I bought it at end of Feb '05 so presume the 505 implies something about the date. So guessing this is hull #843..
Frank C

Post by Frank C »

This question of Hull ID Codes comes up pretty frequently, so I thought it might deserve posting as a separate topic.
User avatar
mtc
Captain
Posts: 545
Joined: Mon Feb 21, 2005 5:06 pm
Sailboat: MacGregor 26M
Location: Panama City Beach, Florida 05 M 'Bellaroo' 60hp Merc BF

Post by mtc »

Yin Yang is the 705th hull to get lifted out of the shell, an October boat 2005 model. I was also looking at a white hull #781 last month, so there's 76 between Oct and Feb. . . for what it's worth.

I do love this little boat.

Michael
Mac

Post by Mac »

Mine's #817 shipped from the factory mid February 2005.

I can see the headlines now...26M makes it across the Atlantic ocean.....in a container !
:D

:macm:
Red Coat
Deckhand
Posts: 36
Joined: Wed Feb 23, 2005 12:00 pm
Location: Sunshine Coast BC Canada

Post by Red Coat »

"CAREFUL: Boats built prior to 1980 use a completely different code, shown on Herman's webpage"

This comment is incorrect.

As a boat theft specialist I lecture on this topic regulary.

HIN's (hull identification numbers) came into exisitence in the USA in 1972 with a two year phase in period. As of 1974 all pleasure craft built in the US or imported to the US were required to have a HIN. Initially a standard HIN format could not be agreed upon (it is rumoured that the USCG and DOT couldn't agree on format, go figure, two government agencies not agreeing) so there were two different formats in use until 1984 when the HIN format was standardized to what we now have.

Prior to 1984 there was the "model format" and the "straight number format".

The basic design of the HIN has been consistent (3 character manufacturer ID, 5 character production number, 4 character date of manufacture). The difference has allways been in the last four characters in the HIN which are used to designate when the boat was built and its model year.

The "Model format" had the letter "M" in the ninth character followed by a two digit model year and the last character was a letter representing the month the hull was made.

The "straight year format" used the last four digits to represent the month and year the boat was made. i.e. 0380 for March of 1980.

In 1984 the format changed, so that the ninth & tenth characters, a letter "A-L"and a number, represents the month and year of manufacture, followed by a two digit number representing the model year.

Canada did not adopt the HIN until 1981 and Europe until 2000. The Europeans effectively have made the HIN into a 14 character format by insisting that all boats sold in Europe have a two letter prefix identifying the country of origin. i.e. "US-MACY1234A404"

We in the in law enforcement and insurance industry have been attempting to get the standard changed to a 17 character VIN system ( similar to your car VIN), due to the fact that the HIN is not designed for law enforcemcent purposes and causes sigifcant problems related to boat theft investigations. NASBLA and Congress approved the change tothe 17 characte VIN but the USCG has steadfastly refused to change the regulations.

Larry
Frank C

Post by Frank C »

Red Coat wrote:"CAREFUL: Boats built prior to 1980 use a completely different code, shown on Herman's webpage"

This comment is incorrect. As a boat theft specialist I lecture on this topic regulary.
------------------------------------
Larry, (as posted elsewhere)

OOPS ... Since I don't own a pre-80 Mac, I didn't read much farther than [month code, A = August] when I declared the pre-80 codes "completely different." Sorry!

I suppose my comment was incorrect because the HIN's basic design is not "completely different." While reading about the history of HINs was interesting, WADR I candidly didn't gain any understanding of the code used by Macgregor prior to 1980 after reading your post, or much clarity into the differences. Therefore, I just quoted the rest of Herman's webpage, as now shown in the "Hull ID" thread.

Re-phrasing then, it seems (to me) that the HIN code is "substantially different" for purposes of an average Macgregor owner. Specifically, the final four-character date segment differs in sequencing, the date segment lacks a "distinct model year," and the month codes are "completely different," by using letters A-to-L but starting with A = August.

If I'm still missing something, please let me know and we'll get it fixed.
Cheers! :|

:D :D :D
User avatar
Duane Dunn, Allegro
Admiral
Posts: 2459
Joined: Fri Jan 02, 2004 6:41 pm
Sailboat: MacGregor 26X
Location: Bellevue, Wa '96 26x, Tohatsu 90 TLDI and Plug In Hybrid Electric drive
Contact:

Post by Duane Dunn, Allegro »

Nemo,

To answer your question your boat is

MAC = Macgregor
M= Model "M"
0843 = Hull # 0843
B5 = Built Feb of 2005
05= Built to 2005 model year specs.

The last matters because they often start building a model years boat prior to the end of the calendar year.

You'll find some that end in 'K405' for example which would be a hull built in Nov 2004 to 2005 model year specs.
User avatar
nemo
Engineer
Posts: 143
Joined: Sun Mar 20, 2005 4:39 pm
Location: Aloha, Oregon, '05 M, Suz70, "Nemo"

Post by nemo »

Thanks Duane, Frank and others for explaining. That explains why my boat smelled of resin so strong when we picked it up Feb 24, same month of manufacture.
User avatar
Catigale
Site Admin
Posts: 10421
Joined: Fri Jun 11, 2004 5:59 pm
Sailboat: MacGregor 26X
Location: Admiral .............Catigale 2002X.......Lots of Harpoon Hobie 16 Skiffs....Island 17
Contact:

Post by Catigale »

why my boat smelled of resin
Maybe you had some of Marks plants on board...

Oh, you meant FRP resin..... :wink:
Locked