Steering wheel holder
Re: Steering wheel holder
We hook a tensioned bungee to a wheel spoke and to the top lip of the adjacent opening in the cockpit seat riser on our X to hold the wheel fixed while tending to other chores. May instead install an eye low on the pedestal on which to hook the lower end of the bungee. With CB positioned to balance the current sailplan, the bungee holds the wheel fixed. Holds course best with wind ahead of the beam. Ron
- DaveB
- Admiral
- Posts: 2543
- Joined: Mon Jan 07, 2008 2:34 pm
- Sailboat: MacGregor 26X
- Location: Cape Coral, Florida,1997 Mac. X, 2013 Merc.50hp Big Foot, sold 9/10/15
Re: Steering wheel holder
Carefull on gusts and proper trim as with proper sails up. I agree in most conditions the bungee's work for temp. work.
Dave
Dave
ronacarme wrote:We hook a tensioned bungee to a wheel spoke and to the top lip of the adjacent opening in the cockpit seat riser on our X to hold the wheel fixed while tending to other chores. May instead install an eye low on the pedestal on which to hook the lower end of the bungee. With CB positioned to balance the current sailplan, the bungee holds the wheel fixed. Holds course best with wind ahead of the beam. Ron
-
Gater Dunn
- First Officer
- Posts: 221
- Joined: Sat Jul 31, 2010 9:25 pm
- Sailboat: MacGregor 26X
- Location: Victoria B.C. Canada N48º25.506 W123º18.178 OakBay Marina
- Trouts Dream
- Captain
- Posts: 663
- Joined: Thu Dec 14, 2006 12:10 pm
- Sailboat: MacGregor 26X
- Location: Calgary, Alberta--1997 26X--Yamaha 90HP 2 Stroke....grunt, grunt
Re: Steering wheel holder
Admiral wasn't always available and I ended up with a clutched steering system. When I let go of the wheel it locks in place. to feel weather helm I move the wheel and determine load from resistance.
- Indulgence
- First Officer
- Posts: 206
- Joined: Mon Aug 11, 2008 6:53 pm
- Sailboat: MacGregor 26X
- Location: Calgary, Ab, Canada
Re: Steering wheel holder
In spite of the hoots of derision from the bungee cord crowd, this works ridiculously well:
http://www.macgregorsailors.com/modt/in ... ?view=1143
http://www.macgregorsailors.com/modt/in ... ?view=1143
- CampCook
- Engineer
- Posts: 113
- Joined: Wed Nov 18, 2009 10:12 am
- Sailboat: MacGregor 26M
- Location: Arizona
Re: Steering wheel holder
Seems like this would be a good addition even with a "real" autopilot. to aide in a heave to situation, for instsnce.
- c130king
- Admiral
- Posts: 2730
- Joined: Sun Nov 05, 2006 5:30 pm
- Sailboat: MacGregor 26M
- Location: Wiggins, MS --- '05 26M "König" w/ 40hp Merc
- Contact:
Re: Steering wheel holder
Heave to is very easy with wheel pilot...just engage the wheel pilot motor but leave controller in standbyl. But bungy's work great for heave to...not so well to hold a heading but it can hold the wheel at full rudder deflection pretty easily.
Cheers,
Jim
Cheers,
Jim
- CampCook
- Engineer
- Posts: 113
- Joined: Wed Nov 18, 2009 10:12 am
- Sailboat: MacGregor 26M
- Location: Arizona
Re: Steering wheel holder
Thanks Jim.
Good to know. Have not placed my oder yet so just drooling over manuals and missed that one
Dave
Good to know. Have not placed my oder yet so just drooling over manuals and missed that one
Dave
