AWK111 Sounds Hobie 33ish! Couple that with the popular features and versatility of the Mac26 and I would be looking. If it was available for purchase at the same basic build-out as the Mac26 without options, with the much better build quality you mention and more sailing potential I would be very i...

On the top of my mast is a small bolt, guessing size 12, with about 1" of thread and a lock nut, hand tight, exposed.

Jeff

My 07' has two bolts with flat washers and lock nuts holding the bow roller.

Jeff

Much of the hardware on my alum trailer was quite loose but I had no dealer prep which would probably take care of it before you pick your boat up. If there isn't going to be any prep you may want to take some time to go over the trailer with your complete set of hand tools before setting out on you...

Bob Just changed to a Hydrus 14x11x3 and used it yesterday on the etec60, M26, and getting close with this prop. Was on a lake at 4000ft. Tach read aprox 5550 and GPS-16.1 MPH at its highest reading with full ballast and gear. Based on available props that I could find it was the closest guess and a...

ALX357 defines the problem previously, regarding the geometry of boat and trailer when loading and its influence on the boats final position in the trailer. Ours uses a bow stop attached to a jacking screw which is moved toward the front of the trailer allowing the boat to come far enough up onto th...

After reading this thread I decided to sign-up and note my experiences with the new aluminum trailer. The trailer design, in my opinion, takes a minimalist approach in its completed state and overall quality, as does the boat itself when new, allowing the owner plenty of opportunity to get to know t...