These are my choices in plywood at my local Home Depot. My Mac 25' has a little bit of teak I'd like to try my best to stain the plywood to match. I'm replacing the cheezy bulkhead wood and planning some other projects. Which of the three ply's would you choose, and how would you opt to finish it? O...

I've just ordered this panel as well, and also another Seadog panel with 6 switches. I'm replacing a broken 6 switch panel that is currently mounted just to the right of keel winch handle. Directly behind is the area with the tube and cable...the tube i assume is to limit water splashing up and in??...

If i run 3 seperate positive wires, all 16 Gage, up the mast 28 feet, what gage of wire would i need for these three to share one negative return? I need to power Anchor, Steaming, and deck light. While i'm at it, should i run additional wire for something in the future? Do TV antennas require power...

Okay, on the very top of mast I have a 360 degree white light, and a tiny 360 degree LED light. Also, a couple inches below the spreaders a light is mounted on the forward face of the mast pointing down at the deck. 1) The two at the top, is one the steaming and the other the anchor ? And if so, the...

Thanks guys!

Hmmmm....maybe i came to the wrong place??.

Hey guys, I've read all i could find about the subject, but i still have a few questions. 1) When rebedding items that DO NOT go through cored areas, should i still use over sized drill and fill with epoxy? Or will a good backing plate and butyl tape suffice? 2) I've decided to use butyl tape for al...